Skip to content
|
|
Developer
|
Dilution
|
Time
|
Temperature
|
E.I.
|
|
PMK
|
1:2:100
|
11 m
|
75° F
|
250
|
|
Comments: 120 Roll Film. Agitate for first 30 seconds, then 5 seconds (2 inversions) every 30 seconds thereafter. For diffusion enlarger.
|
Robert C. McColloch’s Recommendation for Kodak Tri X Professional
|
Developer
|
Dilution
|
Time
|
Temperature
|
E.I.
|
|
HC-110
|
7.3 : 992.7
|
17.5 m
|
68° F
|
160
|
|
Comments: 7.3ml HC110 concentrate per liter of water (measured with a veterinarian syringe); agitate till first minute is up, thereafter, 15-seconds each minute. Based on a Zone VIII
negative where logD ≠ 1.3.
|
Kevin Lyons’ Recommendation for Kodak Tri X Professional
|
Developer
|
Dilution
|
Time
|
Temperature
|
E.I.
|
|
Rodinal
|
1:50
|
10.5 m
|
70° F
|
200
|
|
Comments: TXP 320 exposed E.I. 200 using an incident light meter. 3 minute water presoak @ 70 degrees. 60 seconds agitation for first minute and then 10 seconds every
minute. I use a Paterson large tank that holds 5 reels of 120/220 film. I load the bottom two reels with 220 film, then put three empty reels on top. I use 40 ml of Rodinal and 2 liters of water
for two 220 films, as a one shot developer.
|