Joe Miller’s Recommendations for Ilford Delta 100
Developer |
Dilution |
Exposure |
Time |
Temperature |
E.I. |
| Xtol | 1:3 | N | 15m 45s | 68° F | 80 |
| Xtol | 1:3 | N+1 | 18m 30s | 68° F | 80 |
| Comments: Agitation: 5 inversions every 30 seconds. | |||||
Ed Buffaloe’s Recommendations for Ilford Delta 100 |
||||
Developer |
Dilution |
Time |
Temperature |
E.I. |
| Rodinal | 1:50 | 8.5 m | 68° F | 50 |
| PMK | 1:2:100 | 13 m | 70° F | 64 |
| PMK+ | 1:2:100 | 14 m | 70° F | 100 |
| Comments: For Rodinal: Agitation for first 30 seconds, then 10 seconds (4 inversions) per minute. For PMK: Agitation for first 30 seconds, then 5 seconds (2 Inversions) every 30 seconds. | ||||
John Hicks’ Recommendations for Ilford Delta 100 |
||||
Developer |
Dilution |
Time |
Temperature |
E.I. |
| D-76 | 1:1 | 12 m | 68° F | 100 |
| D-76 | 1:3 | 18 m 15 s | 68° F | 100 |
| Comments: I've fiddled around with assorted magic potions and concluded that D-76/ID-11 is the best overall for this film. | ||||
Bill Bowes’ Recommendation for Ilford Delta 100 |
||||
Developer |
Dilution |
Time |
Temperature |
E.I. |
| PMK | 1.5:3:250 | 10 m | 68° F | 50 |
| Comments: Delta 100 for Minox and 16mm Submini cameras. 3 min Presoak. Agitation @ 15 sec intervals the first two minutes, 30 second intervals after that. Use a 1/2 x 2 1/2 inch PVC pipe spacer on bottom of SS tank/reel. | ||||
Anders Blomqvist’s Recommendations for Ilford Delta 100 |
||||||
Developer |
Film Type |
Exp. |
Dilution |
Time |
Temperature |
E.I. |
| Xtol | 35 mm | N-1 | 1:1 | 8 m | 20° C | 100 |
| Xtol | 35 mm | N+1 | 1:1 | 10 m | 20° C | 200 |
| Xtol | 120 | N-1 | 1:1 | 7 m | 20° C | 100 |
| Xtol | 120 | N+1 | 1:1 | 11 m | 20° C | 160 |
| Comments: Agitation: first 30 seconds, plus 5 seconds every 30 seconds thereafter. | ||||||